polytec

ALUMINIUM framed glass door care

Your ALUMINIUM framed glass doors are manufactured from the highest quality materials and designed to provide years of trouble free service.

Whilst your doors are made from the highest quality anodised aluminium extrusion care should be taken to wipe up spills immediately, ensuring the doors are not exposed to high or continuous levels of moisture, steam and humidity.

ALUMINIUM framed glass doors should be cleaned as follows:

Stains
Using a mild household spray wipe down the doors with a soft cloth taking care not to rub too hard. Dry using a soft cloth so as not to leave any spray on the door.

You may also use Methylated Spirit on a soft cloth, using a circular cleaning motion. Thoroughly clean over the wider area with water and detergent  on a damp cloth afterwards to remove any residual Methylated Spirit.

Always ensure that you refer to the recommendations provided by the cleaning product manufacturer before use.

To ensure that your Warranty will not be void, DO NOT use any of the following on ALUMINIUM framed glass doors:

Commercial Cleaning Products, Abrasive Cleaners, Scouring Pads or Abrasive Papers, Acids and Alkalis, Solvents, Thinners, Turpentine (Turps), Ammonia, Bleach, Acetone, M.E.K. and any other cleaning agents containing Organic Solvents or the above mentioned products.

Please Note: polytec provide a limited seven (7) year warranty on all door products which insures against design, workmanship & manufacturing defects. If you detect any problems with your doors polytec must be notified within seven (7) years from the date your doors were manufactured. Failure to follow the above care instructions could result in damage to your doors and void your entitlement to the warranty.

Download and view our ALUMINIUM framed glass door care information sheet by Clicking Here